First Alert FA148C - Quick Guide to System Functions

- 45 -
Quick Guide to System Functions
FUNCTION PROCEDURE COMMENTS
Check Zones
Press
[
✴
]
Do this to view faulted zones when system is
not ready.
Arm System Enter code or press #
Press arming key desired
(AWAY, NIGHT-STAY*, STAY,
INSTANT, MAXIMUM)
* Press STAY twice in rapid
succession to arm NIGHT-STAY
Do this to arm the system in the mode
selected.
Disarm System Enter code
Press OFF [1]
Do this to disarm the system and silence
alarms.
Bypass Zones Enter code
Press [6]
Enter zone numbers to be bypassed
(use 2-digit entries)
Do this to bypass protection zones. Bypassed
zones are unprotected and will not cause an
alarm if violated.
Quick Bypass Enter code
Press [6] and stop
Do this to bypass all faulted zones
automatically, if programmed.
Chime Mode ON Enter code
Press CHIME [9]
Do this to turn on CHIME mode. Keypad
will sound if doors or windows are violated
while system is disarmed.
Chime Mode OFF Enter code
Press CHIME [9]
Do this to turn CHIME mode off.
Test Mode ON Enter code
Press [5]
Do this to enter TEST mode. Sounds alarm
sounder and allows sensors to be tested.
Test Mode OFF Enter code
Press OFF [1]
Do this to turn TEST mode off. System returns
to normal mode.
Add or Change a
User
Enter Master code
Press [8] key
Enter user's 2-digit user no.
Enter code for that user
Do this to add or change a user code.
Delete a User Enter Master code
Press [8] key
Enter user number to be deleted
Do this to delete a user code from the system.
Change a Master
Code
Enter Master code
Press [8] key
Press [0] + [2] (master user no.)
Enter new 4-digit Master code
Enter new Master code again
Do this to change the existing Master code.