4 5
OPTIONAL NORMAL WEIGHING MODE
1. Auto step on weighing
1.
2.
3. 4.
1. Install battery and place the
2. Step on the weighing platform
3. Display your weight
locked
2. Consecutive add-on weighing
After digits stabilize, more additional loadings can be conducted. Ensure each add-on loading has to
exceed 2kg to get a new reading.
hold your baby together, without stepping off the scale. Then you will get the total weight reading.
Subtracting the previous reading of yourself from the new reading, you will get the difference as your
baby‘s weighing value.
1.
2. 3.
2. Hold your baby without stepping off the scale.
3. Display total weight.
WARNING INDICATIONS
Low Battery Indication
The battery power is running low, please replace with a new battery.
Over-load Indication
The weighing subject on the platform exceeds the maximum capability of scale. Please
step off to avoid damage.
Low Fat% Indication
The Fat% is too low. Please lead a more nutritional diet and take good care of yourself.
High Fat% Indication
The Fat% is too high. Please watch your diet and do more exercise.
Re-test
Error exists, please re-test to get the correct result.
FAT/HYDRATION/MUSCLE/BONE/CALORIE MEASURING MODE
(1) Setting personal parameters
Memory Gender Height Age
1 Male 165cm/5‘05.0“ 25
2. Parameters can be set in the following range:
Memory Gender Height Age
3. Parameter setting
Power off
Press SET
switch on
Press
to select
user code
Default
parameters
and prompt to
next setting
and prompt to
next setting
Press
to select
gender
Press
to set height
and prompt to
next setting
Press
to set age
Tap on the
scale platform
LCD shows „0.0“Auto off after several seconds
Power off
Example: the 3rd user, female,
parameters as follow:
NOTE:
for 6 seconds, the parameters
already set will be memorized
automatically and LCD shows
„0“, meaning body fat measuring
will be started.
during parameter setting, press
to return setting mode, then
you can set user code, gender,
height and age
(2) To Start Measuring
Power off
Press SET
switch on
Show parameters of
the last user or default
parameters
Press
to select user code
or reset parameters
Tap on the
scale platform
LCD shows „0.0“
Step onto weighing
platform gently
with metal
Wait until the digits
stabilize
Weight readings
Measuring...
Shut down automatically
your feet are
touching with
metal
electrodes on
the scale
platform, or
body fat can
not be
To ensure
accuracy,
please remove
your shoes &
socks before
stepping on.
Example:
the 3rd user,
can measure
as follow:
To Next Page
Loading...