3. DISPOSAL
In case of disposal, do not throw your camera in waste disposal
and send it back to First Light Imaging
4. WARNINGS
General warnings
The equipment must be plugged on an electrical wiring compliant with the relevant
standards in the country (in France: NF C 15-100). This wiring must be protected from
overcurrent, overvoltage and ground defaults.
Connected equipments must be compliant with the EN 60950-1 Ed.2006 standard, or
to their own standards.
The power cable plug serves as a disconnection device and should be easily
accessible.
Do not place the equipment close to a heating source or a humidity source.
The security of the system which integrates the equipment is the responsibility of the
system assembler only.
For your safety, the equipment must be TURNED OFF AND UNPLUGGED before any
technical intervention.
The security provided with this equipment is only guaranteed with a use in accordance
with the specified purpose. Only use the provided (MEAN WELL USA Inc, model
GST18A12-P1J) power supply.
To Next Page
Loading...
