Need help?Do you have a question about the First Light C-RED 3 and is the answer not in the manual?
Provides essential safety guidelines for electrical connections and operational environment.
Details critical warnings about opening the camera and handling power circuitry.
Lists technical parameters, dimensions, and operating/storage conditions for the camera.
Covers mechanical, optical, power, and communication interfaces of the camera.
Provides step-by-step instructions for connecting power, Camera Link, and USB.
Details the FliVision GUI and procedures for powering the camera on and off.
Explains Integrate While Read (IWR) and Integrate Then Read (ITR) modes.
Covers Single Read, High Dynamic Range (HDR), and Automatic Gain Control (AGC).
Covers internal/external synchronization, timing diagrams, and polarity settings.
Details bad pixel correction, bias, and flat field correction methods and formats.
Outlines essential safety precautions for using and handling the C-RED 3 camera.
General| Sensor Type | InGaAs |
|---|---|
| Interface | Camera Link |
| Power Supply | 12V DC |
| Resolution | 320 x 256 |
| Wavelength Range | 0.9 µm to 1.7 µm |
| Cooling | TEC cooled |
| Recording Format | RAW |
| Spectral Range | 0.9 µm to 1.7 µm |
To Next Page
