First Light C-RED 3 - Introduction; Caution; Overview

6
1. INTRODUCTION
Thank you for choosing C-RED 3!
C-RED 3 features and performances are described in detail within this User Manual.
It contains all information and advice needed to get the optimum performance from C-RED 3.
The module version is a C-RED 3 camera without its mechanical shell, hence this manual is also
relevant for the module version.
The “chapter 12 C-RED 3 MODULE” provides the specific mechanical interfaces and the few additional
information needed for the module version.
You can also find an up-to-date version of this User Manual on our website:
https://www.first-light-
imaging.com/user-manuals/
Please contact our support for any question at: support@first-light.fr
Caution
Your C-RED 3 camera contains fragile components.
This User Manual describes precisely how to handle your material properly and to avoid accidents.
Please follow the instructions of use to take advantage of all C-RED 3 performances.
Please carefully read the warnings (section 2) and follow the safety precautions to avoid any personal
injury or damage when using the camera.
Overview
C-RED 3 is a revolutionary ultra-high-speed low noise camera designed for high resolution short wave
infrared imaging.
It is equipped with an Indium Gallium Arsenide (InGaAs) (640 x 512) pixels sensor of 15 µm each.
Thanks to its advanced technology in electronics, software, and its innovative mechanics, C-RED 3 is
capable of unprecedented performances: up to 600 images per second at full frame. C-RED 3 offers
Camera Link® or USB3 interface depending on your camera configuration.
Your C-RED 3 camera contains fragile components, especially the detector. Please always handle your
camera with care.
Note: The truly useful area is 638 x 510. Indeed, the contour of the detector may behave differently.
Always follow the instructions of use.