Water Replacement
Error Codes
Cleaning and Storage
Troubleshooting
21903 68th Avenue South
Kent, WA USA 98032
Phone: (888) 820-3690 #112
Email: warranty@aqua-bedwarmer.com
Web: www.aqua-bedwarmer.com
1. IMPORTANT – Disconnect the power from the unit
before removing or replacing any water in the system.
2. Place system directly above a large, open container.
3. Dispense the water from the pump system by
twisting both hoses counter-clockwise and disconnect-
ing the hoses from the assembly.
4. Dispense the water from the mat by inserting the
pump into either hose then pushing and pulling the
handle until the water is forced out of the opposite hose.
5. Follow the instructions in “Initial Setup” to add water
into the system.
Product Registration
This product must be registered within 10 days of purchase to validate war
-ranty. To register, complete and return the included warranty registration
card or register online at www.aqua-bedwarmer.com.
Warranty Policy
Aqua BedWarmer comes with a 2year limited warranty from the date of
purchase for the original owner. The product must be registered within 10
days to validate warranty. If a defect in the heater unit and/or mat arises, the
item(s) may be replaced under warranty. Unit(s) exhibiting damage and/or
evidence of unauthorized modification will be void of warranty coverage.
E1
E2
E3
E4
E5
E6
Code Description Troubleshoot
Low Water Level Insert Water
Temperature Sensor Contact Support
Circulation Pump Contact Support
Heater Contact Support
System Overheat Contact Support
Water Level Sensor Contact Support
Aqua BedWarmer Support
User Manual
09
English
10
To Previous Page
Loading...