SelectAirCon.com
Tel 647171531 or
966719362
Page 7 of 15
Remote Controller Preparation
Open back cover, insert batteries. Press the button with a pointed
object to adjust the time.
Press the HR and MIN
buttons to set the correct
time.
Press the button again tos et
the time.
Warning
If the remote control operation does not appear to be working,
replace the batteries and try again.
The Remote controller should be less than six metres away from the
indoor unit.
Treat the remote control carefully. Do not allow it to fall to the floor.
When a button is pressed, the indoor unit will emit a beep once or twice.
Remove the batteries if the remote control is not going to be used
To Next Page
Loading...