What to do if FIS E Series Measuring Instruments give inaccurate measurements?
If your FIS Measuring Instruments are showing inaccurate measurements, it could be due to a dirty optical connector. Clean the optical connectors to resolve this. Alternatively, a weak fiber connection may be the cause. Try re-connecting the fiber to ensure a secure connection.
Why is the display faint on my FIS E Series Measuring Instruments?
If the LCD screen on your FIS Measuring Instruments is faint, there are a couple of potential reasons. First, ensure the power is on by pressing the key. If the display is still faint, the battery power may be too low; in this case, change the batteries.
Describes the physical layout and components visible on the front panel of the optical power meter.
Explains the functionality of each key on the device, including screen display, power key, and unit selection.
Provides step-by-step guidance on how to power the instrument on and off, including standby mode.
Details the procedure for performing output power measurements, including connecting cords and selecting wavelengths.
Explains how to set a reference value and calculate relative optical power measurements in dB.
Describes the data saving capability, file numbering, and how to confirm saved readings.
Guides users on enabling and utilizing the automatic wavelength identification feature.
Explains how the OPM detects and displays the output frequencies from a light source.
General| Dynamic Range | Up to 45 dB |
|---|---|
| Event Dead Zone | 0.8 m |
| Pulse Width | 3 ns to 20 μs |
| Operating Temperature | -10°C to 50°C |
| Type | Optical Time Domain Reflectometer (OTDR) |
| Display | 7-inch TFT-LCD touchscreen |
| Connectivity | USB |
| Power | Rechargeable lithium-ion battery |
| Storage | Internal memory, SD card |
| Power Supply | 100-240 V AC, 50/60 Hz |
To Next Page