To Next PageTo Next Page
Need help?Do you have a question about the FISCHBEIN 10.000 and is the answer not in the manual?
General| Brand | FISCHBEIN |
|---|---|
| Model | 10.000 |
| Category | Sewing Machine |
| Language | English |
Details about the recommended motor specifications for the sewing head.
Instructions for checking and maintaining initial oil levels and pressure.
Guidance on using specific lubrication oil and general oil maintenance procedures.
Cautions for handling and installing seals to prevent leakage.
Procedures for removing lint and cleaning machine parts.
Recommendations for operating the machine in cold environments to prevent issues.
Steps to ensure proper oil circulation after extended periods of inactivity.
Steps for starting sewing, including material placement and thread checks.
Instructions for properly threading the sewing machine needle and looper.
Guidelines for setting looper and needle thread tensions for optimal stitching.
How to adjust the stitch length using the feed rocker mechanism.
Explanation of the needle thread pull-off adjustment and its normal setting.
Instructions for correctly positioning the looper holder on the looper shaft.
Information on the needle guard's stationary nature and replacement setting.
How to adjust the presser foot spring pressure and its factory setting.
Ensuring the sewing head runs at the correct speed relative to the conveyor belt.
Checks and actions related to oil levels and pressure gauge readings.
Common causes and checks for thread breakage and skipped stitches.
Reasons why the chain stitch might not form after sewing is complete.
Troubleshooting steps for frequent needle breakage during operation.
