FISCHBEIN F Series User Manual

FISCHBEIN
®
F SERIES PORTABLE SEWING MACHINES
OPERATOR’S MANUAL
REV. H 9/2011
1
TABLE OF CONTENTS
PAGE
1. INTRODUCTION 3
1.1 Product Description 4
1.2 Identification 6
1.3 Warranty Card 7
1.4 Warnings 7
1.5 Characteristics 9
1.6 Illustrations and
Components 10
1.7 Accessories 13
2. UNPACKING
PROCEDURE 13
3. PREPARATION 14
3.1 Electrical Requirements 14
3.2 Pressure (Model F-A) 14
3.3 Work Area 14
3.4 Lubrication 15
3.5 Consumables 15
3.6 Threading the Model F 16
3.7 Thread Tension 18
3.8 Crepe Tape (Optional) 19
4. OPERATING THE MODEL F
PORTABLE 20
5. MAINTENANCE,
REPLACEMENT AND
ADJUSTMENTS 25
5.1 Routine Maintenance 25
5.2 Lubrication 27
5.3 Drive Belt 28
5.4 Feed Dog 30
5.5 Tape and Thread Knife 32
(Optional)
5.6 Thread Knife 33
5.7 Looper 35
5.8 Motor Brushes 39
5.9 Needle 40
5.10 Presser Foot Pressure 43
5.11 Throat Plate 46
5.12 Tape Folder Assembly
(Optional) 47
TABLA DE CONTENIDO
PAGINA
1. INTRODUCCION 3
1.1 Descripción del Producto 4
1.2 Identificación 6
1.3 Tarjeta de Garantía 7
1.4 Advertencias 7
1.5 Características 9
1.6 Ilustraciones y Componentes 10
1.7 Accesorios 13
2. PROCEDIMIENTO DE
DESEMPAQUE 13
3. PREPARACION 14
3.1 Requerimientos Eléctricos 14
3.2 Presión (Modelo F-A) 14
3.3 Area de Trabajo 14
3.4 Lubricación 15
3.5 Productos de Consumo 15
3.6 Enhebrando la Modelo F 16
3.7 Tensión del Hilo 18
3.8 Cinta Crepé (Opcional) 19
4. OPERANDO LA PORTATIL
MODELO F 20
5. MANTENIMIENTO, CAMBIOS
Y AJUSTES 25
5.1 Mantenimiento de Rutina 25
5.2 Lubricación 27
5.3 Polea Impulsora 28
5.4 Alimentador Dentado 30
5.5 Cuchilla de Cinta e Hilo 32
(Opcional)
5.6 Cuchilla de Hilo 33
5.7 Ojo Gu í a 35
5.8 Escobillas del Motor 39
5.9 Aguja 40
5.10 Pie Prensador 43
5.11 Placa de Garganta 46
5.12 Conjunto Doblador de
Cinta (Opcional) 47

FISCHBEIN F Series Specifications

General

Brand	FISCHBEIN
Series	F
Stitch Type	Chain Stitch
Lubrication	Automatic Oil Lubrication
Needle Count	1
Speed	1700 SPM
Usage	Bag Closing

Summary

1. INTRODUCTION

1.1 PRODUCT DESCRIPTION

Describes the Fischbein MODEL F Series Portable sewing machines as hand-held commercial grade sewing machines.

1.2 IDENTIFICATION

Details the two identification plates attached to the machine and their purpose.

1.4 WARNINGS

Provides safety warnings regarding motors, moving parts, pinch points, and sharp edges.

2. UNPACKING PROCEDURE

3. PREPARATION

3.4 LUBRICATION

Instructions for using Fischbein #5-100 Lubricating Oil and the manual oiling system.

3.6 THREADING THE MODEL F

Step-by-step guide on how to properly thread the MODEL F sewing machine.

3.7 THREAD TENSION

Explains thread tension, its effect on stitches, and how to adjust it using tension nuts.

4. OPERATING THE MODEL F PORTABLE

5. MAINTENANCE, REPLACEMENT AND ADJUSTMENTS

5.1 ROUTINE MAINTENANCE

Daily and weekly maintenance tasks, including cleaning, checking fasteners, and oiling.

5.2 LUBRICATION

Instructions on using genuine Fischbein Lubricating Oil and ensuring the oil reservoir is full.

5.3 DRIVE BELT

5.4 FEED DOG

5.5 TAPE AND THREAD KNIFE

5.6 THREAD KNIFE

5.7 LOOPER

5.8 MOTOR BRUSHES

5.9 NEEDLE

5.10 PRESSER FOOT

7. TROUBLESHOOTING

8. SPARE PARTS

9. DRAWINGS AND PARTS LISTS