User maintenance instructions ,oDD36/DDg0 models
Important !
If a dishwasher Meaner/descaler is used, you must run a wash program with detergent
immediately afterward to prevent any damage to your dishwasher.
The dishwasher must be used with the filter plate, drain filter and spray arms correctly in place.
Cleaning the drain filter
1 Unplug the dishwasher or turn it off at the power supply.
2 Ensure the tines above the drain filter are in the upright position.
3 Lift and remove the drain filter. It is normal to find some water under it.
4 Empty, rinse clean under running water and replace back into the allocated space.
5 Ensure the drain filter is flush with the filter plate.
6 Hug the dishwasher back in or turn it on at the power supply.
[
To Next Page
Loading...
