User maintenance instructions ,oDD36/DDg0 mode_s
Cleaning the spray arms and filter plate
Ensure the dishwasher is cool before you start cleaning.
To remove the base rack and spray arms
1 Unplug the dishwasher or turn [t off at the power supply.
2 Take out the cutlery basket.
3 Unclip the glass supports (if fitted) from the rack wires and fold all the adjustable racks away, so
that they are upright and close to the top.
4 Fold down all the tines.
5 Remove the base rack carefully. Start lifting from the back first, tilting the rack as needed to clear
the adjustable racks and the dispenser in the front.
6 Unclip the spray arms off their mounting valves and shake any foreign material out.
7 Rinse the spray arm clean under running water and wipe with a damp cloth.
8 [f necessary, wipe any soiling off the filter plate with a clean, damp cloth.
, arm
Wash pump housing
To Next Page
Loading...
