How to attend to a fault ,oDesigner models
"_ _ U1 No water - the water supply hasn't been
NE4VY RINSE
_} { _ turned on.
"_ : "_ U4 Fault in the other drawer preventing the
HEAVY FAST
IZ2 _ use of this drawer.
_" °'J _" U6 The spray arm has loosened or come off
/lEAFY FAST BELIEATE
IZ_ 39 c_3 its mounting, or water pressure is too
low.
;_ El Flood detected.
RINSE
©
...... _J E2 Motor fault.
#ELtCAT£
_u
_j ;, E3 Temperature sensor fault. You may need
OE.C_TERINSE to have a tempering valve installed
_t] (0 on your water supply, to ensure that
incoming water is less than 65°C (149°F).
.... "_ .... E4 Heating element failed.
_s[
_" "_" E5 Fault with the internaJ lid of the
FAST RINSE
_ dishwasher.
"_" _ .... E6 Fault with the drying fan.
F4ST BELICATE
........ "_" "_J "g E7 Electronics fault--detergent dispensing
FAST BEUCATE RINSE
c_ _ system.
.... _" ...... E8 Electronics fault--other systems.
NORMAL
"g .... ;" E9 Electronics fault--controller.
NORMAL RINSE
©
_" _" .... EC Electronics fault--communication
NORMAL FIRST
(_ _9 ...... between drawers.
To Next Page
Loading...
