How to attend to a fault - integrated models with badge
"_ _ U1 No water - the water supply hasn't been
HEAVY RINSE
IZ} _ turned on.
"_ "_ U4 Fault in the other drawer preventing the
HEAVY FAST
IZ2 _ use of this drawer.
_" °'J _" U6 The spray arm has loosened or come off
HEAVY FAST #ELICATE
IZ_ 39 c_3 its mounting, or water pressure is too
low.
;J El Flood detected.
RINSE
©
...... _J E2 Motor fault.
OELtCAT£
_u
_j ;, E3 Temperature sensor fault. You may need
o_.C_TER_NS_ to have a tempering valve installed
_t] (O on your water supply, to ensure that
incoming water is less than 65°C (149°F).
.... "_ .... E4 Heating element failed.
_s[
_" "_" E5 Fault with the internal lid of the
FAST RINSE
_ dishwasher.
"_" _ .... E6 Fault with the drying fan.
FAST BEMCATE
........ "_" "_ "g E7 Electronics fault--detergent dispensing
FAST BEUCATE RtNSE
c_ _ system.
.... _" ...... E8 Electronics fault--other systems.
NORMAL
"g .... ;" E9 Electronics fault--controller.
_tO_MAL FtfN,_E
©
_" _" .... EC Electronics fault--communication
NORMAL FIRST
(_ _ ...... between drawers.
To Next Page
Loading...
