To Next PageTo Next Page
Need help?Do you have a question about the Fisher & Paykel DD24DAX9 and is the answer not in the manual?
Regulates the amount of rinse aid dispensed to prevent excess foam or streaky dishes.
Information for models equipped with a water softener; refer to the user guide for detailed instructions.
Enables the dishwasher to automatically power on for 30 seconds when the drawer is opened.
Disables all audible tones except for critical fault alerts, providing a quieter operation.
Automatically locks the drawer 30 seconds after closing for enhanced safety, especially in boats.
Ensure no wash cycle is currently running before attempting to change any preference settings.
Enter the preference settings menu by pressing specific buttons and scroll through options.
Adjust the value of a selected preference option by pressing the designated control buttons.
Confirm and save the newly adjusted preference setting to exit the settings menu.
This document outlines the preference options and settings for a Fisher & Paykel DishDrawer™ dishwasher, providing a comprehensive guide for users to customize their appliance's operation. The dishwasher offers several adjustable settings to optimize performance, enhance convenience, and cater to specific user needs, including those related to water quality, power management, and user feedback.
The Rinse Aid option allows users to regulate the amount of rinse aid dispensed during a wash cycle. This feature is crucial for achieving optimal drying results and preventing water spots or streaking on dishes. If users notice excessive foam after a wash, it indicates that too much rinse aid is being dispensed, and the setting should be reduced. Conversely, if dishes are wet or streaky, the rinse aid setting should be increased to ensure proper drying and a spotless finish. This adjustment helps maintain the aesthetic quality of dishes and glassware, ensuring they come out sparkling clean and dry.
For models equipped with a water softener, this option allows for adjustments to optimize its performance based on local water hardness. The water softener is designed to reduce mineral content in the water, which can otherwise lead to limescale buildup in the dishwasher and on dishes. Proper adjustment of this setting ensures efficient operation of the softener, prolonging the life of the appliance and improving wash results in hard water areas. Users are directed to the 'Water softener' section of the user guide for detailed instructions on how to set this option correctly, as it often involves testing water hardness and selecting a corresponding level on the dishwasher.
The Open Drawer Auto Power-On feature is a convenience function that automatically powers on the dishwasher for 30 seconds whenever the drawer is opened. This allows users to quickly load or unload dishes without manually pressing a power button. This feature is factory-set to be on but can be turned off if preferred. It is particularly useful for quick access and seamless interaction with the appliance during daily use.
The Closed Drawer Autolock feature enhances safety and convenience by automatically locking the drawer 30 seconds after it is closed. This prevents accidental opening during operation or by children. Once locked, the drawer can be unlocked by pressing the power button, unless Keylock or Childlock is also activated, which provides an additional layer of security. This feature is especially useful in dynamic environments such as boats or motor homes, where movement could cause drawers to open unexpectedly, or in homes with young children.
The Turn Tones Off option allows users to disable all audible tones emitted by the dishwasher, except for fault alerts. This feature is beneficial for users who prefer a quieter appliance, especially in open-plan living spaces or during nighttime operation. While it silences operational beeps and cycle completion notifications, it ensures that critical fault alerts remain audible, notifying users of any issues that require attention.
The process for changing settings is straightforward and involves a sequence of button presses. To enter the menu, users must press and hold two specific buttons together for four seconds. Once in the menu, the display will show the current option, starting with "Rinse Aid." Users can scroll through the options by pressing a designated button. The display uses alphanumeric codes to indicate the current option (e.g., "rA" for Rinse Aid, "Hd" for Water Softener, "AP" for Auto Power-On, "bP" for Turn Tones Off, and "Ld" for Autolock).
To change a specific setting within an option, users press a designated button to cycle through the available levels or states (e.g., "On" or "Off" for power-on and autolock features, or numerical levels for rinse aid and water softener). For instance, to change the Rinse Aid setting from its factory default of 4 to 2, the user would press the adjustment button three times. Once the desired setting is selected, pressing the power button saves the new setting and exits the preference options menu. This intuitive interface allows for easy customization and management of the dishwasher's features.
While the document primarily focuses on operational settings, the Rinse Aid and Water Softener functions indirectly contribute to maintenance. Proper rinse aid levels prevent mineral buildup and water spots, reducing the need for manual cleaning of dishes and the dishwasher interior. The water softener, when correctly set, minimizes limescale accumulation within the appliance's internal components, which is crucial for its longevity and efficient operation. The ability to turn off tones, while a convenience feature, also helps in maintaining a quiet environment, which can be considered a form of "maintenance" of the user experience. The autolock feature, by preventing accidental drawer openings, also protects the appliance from potential damage.
In summary, the Fisher & Paykel DishDrawer™ dishwasher offers a range of customizable preference options designed to enhance user convenience, optimize wash performance, and contribute to the appliance's longevity. These settings allow users to tailor the dishwasher's operation to their specific needs, water conditions, and lifestyle preferences, ensuring a consistently high-quality dishwashing experience.
General| Product Type | Dishwasher |
|---|---|
| Style | Built-in |
| Place Setting Capacity | 14 |
| Control Type | Electronic |
| Number of Wash Cycles | 7 |
| Features | Sanitize option |
| Material | Stainless Steel |
| Energy Rating | Energy Star |
| Programs | Heavy, Rinse |
| Drying System | Fan Assisted Drying |
