Problem Possible Cause What to Do
drawer for several hours
after a wash.
hours after a wash program has finished, as the
small amount of vapor left after the wash may
(with time) resettle on dishes as condensation.
Using rinse aid or increasing its setting may also
help reduce this problem.
Rinse aid depleted. Refill the rinse aid dispenser.
Rinse aid setting too
low.
Increase the rinse aid setting.
Normal Eco wash
program used.
Choose a standard wash program.
Items that require a
longer drying time, e.g.
plastic utensils and
containers
DD***C models only: Set the wash program with
Extra dry. (only available on some wash
programs).
Excessive motor noise
The filter plate and/or
spray arm is incorrectly
placed.
Refer to the ‘User maintenance instructions’
section for details on correct placement.
No water in the motor
area.
This usually occurs on the first use or when the
dishwasher has not been used for long periods of
time. Pour 3 cups of water into the drawer before
running a wash program.
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Double/DD24DAX9/User_Guide_DD24DAX9/13_Tro…
Updated: Tue, 16 Nov 2021 11:46:45 GMT
Powered by
5
To Previous Page
Loading...
Need help?
General
