Delay Start
This [eature allows you to delay the start of the wash
program from one to twelve hours. It is useffd if you
want to take advantage of off peak power rates, (Check
with your local Electrical Utihty if this is available), or if
you wish to start the DishDrawer at a later time.
To Activate Delay Start
1. Ensure the drawer is closed.
2. Pressand hold the Start/Pause button Lmtil the
background color of the Electronic Display
turns orang_.
3. Hold or press the Start/Pause button and the
time will increase in increments of one hour.
You will also hear a beep [or each hour passed.
4. Release the button when the desired time has
been reached.
The DishDrawer wil[ start automatically when the time has
elapsed.
To cancel Delay Start, press the Powerbutton or keep
pressing the Start/Pause until it passes the 12 hours.
The "HRS DELAY'wil[ disappear on the Electronic
Display and the background will be green.
Figure 5 - Electronic
Display in Delay Start
Mode
II
To Next Page
Loading...
