Need help?Do you have a question about the Fisher & Paykel DD603 and is the answer not in the manual?
General| Water Rating | 4.5 stars |
|---|---|
| Child Lock | Yes |
| Wash Cycles | 6 |
| Control Type | Electronic |
| Dimensions | 598mm (W) |
| Programs | Auto, Heavy, Normal, Eco, Rinse, Glass |
| Delay Start | Yes |
Details physical dimensions of the DishDrawer, including height, width, and depth.
Lists electrical, water inlet valve, chassis P.C.B., temperature sensor, drying fan, motor, and stator specs.
Guide on how to enter option adjustment mode and scroll through settings.
Explains how options are indicated via lights on integrated models.
Adjust rinse aid level and set water supply hardness using LEDs.
Describes enabling/disabling the automatic power-up sequence when the tub is opened.
Configure audible beeps and automatic lid closure/locking.
Control clean/dirty symbol display and activate dry enhancement feature.
Instructions to enter diagnostics mode and navigate through its four levels.
How to view all LEDs/LCDs, download data, and clear fault logs.
Tests all hardware outputs and inputs; LCD shows "HO".
How to run a 5-minute diagnostic test cycle for key components.
How to run the DishDrawer continuously in any wash cycle.
Retrieve cycle count and display water temp/voltage during wash.
Activates demonstration modes for display and wash operation.
Quick steps to enter fault display and download mode and clear faults.
Summarizes testing hardware outputs and inputs with LCD display codes.
Quick reference for running fast and continuous diagnostic test cycles.
Steps to display water temperature or controller voltage during a wash cycle.
How faults are displayed (F/U codes) and cleared using the POWER button.
Notes on old U2/U3 faults and how product behavior has changed.
Details F1 fault, flood switch activation, and potential causes.
Details F2 fault, motor not sensed rotating, and potential causes.
Details F3 fault, high water temperature, and potential causes.
Details F4, F9 (electronics failure), and U1 (prime failure) faults and causes.
Step-by-step guide to diagnose and resolve F1 fault codes.
Step-by-step guide to diagnose and resolve F2 fault codes.
Step-by-step guide to diagnose and resolve F3 fault codes.
Guides for diagnosing F4 (element) and F9 (electronics failure) faults.
Step-by-step guide to diagnose and resolve U1 fault codes.
Advice for customers whose plastic items are not drying properly.
Guidance on using rinse aid and cycle selection for better drying.
Causes and solutions for food particles remaining on dishes after washing.
Causes and solutions for coffee/tea stains left in cups.
Causes and solutions for blotchy marks or water stains on dishes.
Causes and solutions for cloudy white film on glasses and cutlery.
How to set water softener hardness and check its function in diagnostics.
Testing the diverter valve's function in diagnostics mode.
Testing the brine pump's function and reservoir level in diagnostics.
Checking the PI function for correct spray leakage to the salt reservoir.
Checking salt reservoir water and warning about detergent in the softener.
Electrical schematic for DishDrawer 603 models.
Electrical schematic for DishDrawer DD603.5 models with water softener.
To Next Page