22
User maintenance instructions
Cleaning the outer surfaces
From time to time the wash program indicator panel and its surrounds need to be cleaned to
remove food particles, hard water scale and any spillages. We recommend wiping these areas
with a clean damp cloth.
Important!
We do not recommend the use of the following cleaning aids on your DishDrawer® as they
may damage the surfaces:
Plastic or stainless steel scouring pads
Abrasive, solvent, household cleaners
Acid or alkaline cleaners
Hand washing liquids or soap
Laundry detergents or disinfectants
For prefinished models
Depending on the type of exterior finish on your DishDrawer®, we recommend the following:
Stainless Steel
This surface requires only a mild dishwashing detergent and warm water. Take care not to wet
the control panel.
Dry with a clean lint-free cloth
DO NOT use proprietary “Stainless Steel” type cleaners or polishes as these may damage the
protective coating.
Important!
Never use abrasive cleaners or harsh solvents as these will damage the stainless steel surface.
White or Black
To clean the doors wipe the doors with a clean damp cloth.
Dry with a clean lint-free cloth.
For integrated models
Clean the integrated control badge with a damp cloth, then dry with a clean, lint-free cloth.
To Next Page
Loading...
