How to fix knocking or rattling sound during Fisher & Paykel Dishwasher wash?
A knocking or rattling sound during a wash cycle in your Fisher & Paykel dishwasher is often caused by: * The spray arm hitting dishes. Pause the wash and rearrange the dishes. * Dishes stacked incorrectly.
How to prevent plastic items discoloration in Fisher & Paykel Dishwasher?
Discoloration of plastic items in your Fisher & Paykel dishwasher can occur due to: * Using an unsuitable detergent. Use only powdered or tablet detergent designed for domestic dishwashers. * Not using enough detergent. Adjust the detergent quantities to suit your particular load and the hardness of your water supply. * Blocked spray arm holes. Clean the spray arm(s). * Blocked filters. Clean the filters. * Not enough detergent, not pre-rinsed. Pre-rinse plastic dishes before placing in the dishwasher and/or add more detergent. Alternatively, using the Rinse programme after adding dishes may minimise staining.
General| Type | Built-In |
|---|---|
| Number of Place Settings | 14 |
| Energy Star Rated | Yes |
| Noise Level | 45 dBA |
| Wash Programs | 6 |
| Drying System | Condensation drying |
| Control Type | Electronic |
| Product Type | Dishwasher |
| Place Settings | 14 |
| Energy Rating | Energy Star |
| Delay Start | Yes |
| Child Lock | Yes |
| Width | 24 inches |
| Water Consumption | 11.5 L |
| Programs | 6 |
Key safety guidelines and precautions for using the dishwasher.
Identifies drain faults, their causes, and solutions.
Addresses no water issues, including tap and hose problems.
Explains flooding errors, possible causes, and recommended actions.
Details water flow errors and troubleshooting steps.
Covers general electronics errors and basic restart procedures.
Addresses errors related to water temperature monitoring.
Explains general alarm errors and troubleshooting.
Details alarm errors, specifically for turbidity sensing.
Covers data or electronics errors for specific models.
Addresses errors related to electronics or power supply.
Explains motor faults and initial troubleshooting steps.
Solutions for when the dishwasher fails to power on or start.
Causes and fixes for water left in the dishwasher after a cycle.
Interprets display codes and actions for Technician Mode.
Troubleshooting steps for unexpected stops during a wash cycle.
Solutions for dishes not coming out clean, covering loading and detergent.
Solutions for white stains or milky appearance on dishes and glasses.
To Next Page