What to do if my Fisher & Paykel EB60 Coffee Maker appliance will not make coffee?
If the appliance won't make coffee, it might have detected impurities in its internal circuits. Wait for the appliance to be ready for use again, then reselect the drink you want. Contact Customer Care if the problem continues.
What to do if my Fisher & Paykel Coffee Maker does not turn on?
The appliance may not turn on if it is not plugged into the mains socket or if the main switch is not turned on.
Why is my Fisher & Paykel EB60 Coffee Maker coffee not hot?
If your coffee isn't hot enough, it might be because the cups weren't preheated. Try warming the cups by rinsing them with hot water, using the hot water function. Also, the infuser might have cooled down if a few minutes have passed since the last coffee was made. To fix this, heat the infuser before making coffee by using the rinse function.
What to do if my Fisher & Paykel EB60 Coffee Maker milk does not come out of the milk spout?
If milk isn't coming out of the spout, several factors could be at play. First, the milk container lid might be dirty; clean it as instructed in the ‘Cleaning the milk container’ section. Second, the milk might not be cold enough, or it might not be light or skimmed milk. Use light or skimmed milk at refrigerator temperature (around 5°C or 41°F), or try a different brand. Third, the froth adjustment dial might be incorrectly adjusted; adjust it following the instructions in the ‘Adjusting the amount of froth’ section. Also, the froth adjustment dial could be dirty, so clean the milk container lid and froth adjustment dial. Finally, the hot water/steam connection nozzle could be dirty; clean the connection nozzle as described in the ‘Cleaning the hot water/steam connection nozzle’ section.
Why is my Fisher & Paykel EB60 Coffee Maker coffee weak?
If your coffee is weak or not creamy enough, it could be due to several reasons. First, check if a low coffee temperature is set and adjust to a hotter setting in the menu. Second, the coffee might be ground too coarsely. Adjust the grinding dial one click anticlockwise towards '1' while the mill is operating, repeating until you get the desired result. The effect will be noticeable after two coffees. If still not to your liking, try a different coffee brand. Alternatively, the coffee could be ground too finely, so turn the grinding adjustment dial one click clockwise towards '7' while the coffee mill is in operation. Finally, the coffee spouts might be blocked; clean them with a toothpick.
Why does my Fisher & Paykel EB60 Coffee Maker emit noises or steam when not in use?
The machine might emit noises or small puffs of steam while not in use because it's ready or has recently been turned off, and condensation is dripping into the hot vaporiser. This is normal; empty the drip tray to limit it. Also, the appliance may not have been turned off correctly. Turn it off by pressing the AUTO OFF button. During the two rinse cycles, the water tank may not have been filled to the MAX level; follow the appliance's instructions, but first empty the drip tray to prevent overflow.
General| Product type | - |
|---|---|
| Built-in grinder | Yes |
| Capacity in cups | 4 cups |
| Coffee input type | Coffee beans, Ground coffee |
| Coffee maker type | Fully-auto |
| Milk tank capacity | 0.5 L |
| Appliance placement | Built-in |
| Water tank capacity | 2.5 L |
| Coffee beans capacity | 350 g |
| Maximum operating pressure | 15 bar |
| Reservoir for brewed coffee | Cup |
| Number of temperature settings | 5 |
| Quantity per pack | 1 pc(s) |
| Current | 10 A |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Cordless | No |
| Control type | Touch |
| Product color | Black, Stainless steel |
Weight and Dimensions| Depth | 480 mm |
|---|---|
| Width | 596 mm |
| Height | 458 mm |
Essential precautions and warnings for safe appliance operation.
Warnings related to appliance use, hot surfaces, and specific risks.
Verifying completeness, setting language, and initial configuration.
Steps to fill the water tank and prime the system for first operation.
How to test and configure the appliance's water hardness setting.
Adjusting beverage settings and saving personal profiles.
Adjusting beverage intensity and volume according to preference.
Filling and attaching the milk container for frothing beverages.
Adjusting strength, size, and saving custom beverage profiles.
Steps for initiating and performing the appliance descaling cycle.
Instructions for rinsing the system and refilling the water tank after descaling.
Notifications for cleaning, descaling, and filter replacement requirements.
Resolving problems with coffee temperature, strength, and flow rate.
Addressing issues with power, infuser extraction, milk flow, and noise.
To Next Page
