47
Care and cleaning
2 Check the rubber pads are in place.
3 Check the pane is the right way
around . The painted side faces toward
the front of the door and the shiny
side faces into the oven.
1 Make sure the open levers firmly
hook to the door.
To refit the glass pane
Rubber pads
1
4 Insert the pane into the slide guides
and slide it to the bottom retainers.
Slide guides
Bottom
retainers
5 Open the door fully and close the
levers.
6 Note: The gap between the top edge
of the inner glass pane and door is
normal. This is part of the air
circulation system.
Lever
To Next Page
Loading...
