Table for the choice of the injectors
Cat: II 2H3+
Lubrication of the gas taps
A qualified technician must lubricate the gas taps.
Important!
All intervention regarding installation maintenance and conversion of the appliance must be fulfiled with
original factory parts.
The manufacturer declines any liability if these correct parts are not used.
(*) Power calculated with inner crown operating
(#) Power calculated with inner and outer crowns operating
BURNERS
Nominal
power [kW]
Reduced
power [kW]
LPG
G30 - 28-30 mbar
G31 - 37 mbar
Natural gas
G20 - 20 mbar
Injector Dia.
[1/100 mm]
Injector Dia.
[1/100 mm]
Semi-rapid
1,75 0,45 66 101
Triple-ring wok
3,50 1,50 93 135
Dual
Inner crown
0,80 (*) 0,35 (*)
46
(no. 1 central)
70
(no. 1 central)
Outer crown
4,50 (#) 1,90 (#)
70
(no. 2 outer)
104
(no. 2 outer)
To Next Page
Loading...
