Why do my Fisher & Paykel RF201A Refrigerator ice cubes have an odor?
- SSara StevensSep 5, 2025
If your ice cubes have an odor or taste, discard the old cubes and ensure food packaging is sealed.

Why do my Fisher & Paykel RF201A Refrigerator ice cubes have an odor?
If your ice cubes have an odor or taste, discard the old cubes and ensure food packaging is sealed.
Why does the water from my Fisher & Paykel Refrigerator taste bad?
If the water from your Fisher & Paykel Refrigerator has a poor taste or odor, dispense 3 L (3 qt) of water to replenish the fresh water supply.
Why is the measured fill inaccurate on my Fisher & Paykel RF201A Refrigerator?
If the Measured Fill amount of water is inaccurate on your Fisher & Paykel Refrigerator, recalibrate it.
Why are ice cubes produced slowly in my Fisher & Paykel RF201A Refrigerator?
If ice cube production is slow in your Fisher & Paykel Refrigerator, make sure the door is closed properly.
Why doesn't the tray slide evenly in my Fisher & Paykel Refrigerator?
If a tray or bin in your Fisher & Paykel Refrigerator doesn't slide in and out evenly, check to ensure no food or packaging is trapped behind it. Holding onto sides of tray/bin, extend the runners fully by using a firm pull – this will reset the runner.
Why is the first glass of water warm from my Fisher & Paykel RF201A Refrigerator?
If the water in the first glass from your Fisher & Paykel Refrigerator's dispenser is warm, allow 24 hours for the water to cool to the set temperature.
| Brand | Fisher & Paykel |
|---|---|
| Model | RF201A |
| Category | Refrigerator |
| Language | English |
Warning about electric shock hazard and the importance of reading safety instructions.
Covers child entrapment, disposal, electrical safety, and cord handling.
Guidelines for storing volatile materials, liquids in glass, and carbonated drinks.
Recommendations for handling food that has thawed during a power outage.
Warning about using cleaning products containing solvents that may damage plastic components.
Critical warnings for water filter installation, including water quality and pressure.
Step-by-step guide for connecting the water filter, PRV, and tap connection.
Attaching the filter, running tubing, and connecting to the solenoid valve.
Checking for leaks, flushing water, and activating the ice maker for the first time.
Ensuring leak-free connections, correct tubing routing, and push-fit security.
Ensuring proper power connection, accessibility, and grounding of the appliance.
Recommendations for placing the refrigerator away from direct sunlight and heat sources.
Recommended cabinetry dimensions and minimum air clearances for proper ventilation.
Instructions for moving the appliance using rollers and aligning it with cabinetry.
How to adjust front feet to ensure refrigerator doors are aligned correctly.
Steps to stabilize the appliance if it is rocking or unstable on uneven floors.
Steps before stocking the refrigerator, including removing packaging and initial cooling.
Advice on maintaining energy efficiency, such as avoiding door openings and ensuring clearance.
Instructions for safely moving, storing, or relocating the refrigerator.
Ensuring the refrigerator is on, cooled, water filter connected, and ice maker is ready.
Explanation of the main menu, measured fill, and arrow key functions.
Details on Measured Fill, Dispensing water, Chill functions, Temperature, Ice, and Settings.
How to operate the dispenser pad for one-handed water dispensing.
Steps for initial dispensing, including flushing the tank and discarding water.
Instructions for turning on the ice maker and forcing cycles.
Situations where it is recommended to turn off the ice maker.
Details on ice production, storage bin, and scoop usage.
Safety notes regarding moving parts and ice quality, plus installation requirements.
How to use the pre-measured water dispensing feature and adjust quantities.
How to switch between US imperial and metric units for measured fill.
Boosts freezer cooling for faster freezing of food items.
Chills beverages rapidly in the freezer with an alarm reminder.
Important advice on not leaving bottles too long and deactivating the function.
How to adjust the temperature settings for optimal food storage.
Covers unit conversion, key silent mode, key/dispenser lock, and Sabbath mode.
Information on 'No water', 'Filter reset', and 'Fault' indicators and codes.
Details on the humidity cover's function and benefits for produce storage.
How to adjust humidity slides based on stored fruit and vegetables.
Description of the slim storage drawer for deli items, beverages, or defrosting foods.
Explanation of how door alarms function and when they activate.
Guide to positioning and using the bottle rack.
Step-by-step instructions for removing and installing a new water filter cartridge.
Procedure for resetting the filter indicator after replacement.
How to disable the filter indicator if no filter is fitted.
Critical advice on water quality, filter replacement, and handling frozen systems.
How to fine-tune the water dispenser's accuracy based on water pressure.
Instructions for safely replacing the halogen light bulb in the refrigerator.
Advice on when to contact authorized service centers for repairs.
How to clean exterior stainless steel doors using mild detergent.
How to clean the dispenser pad and interface panel.
General cleaning instructions for the appliance's exterior surfaces.
Instructions for cleaning the water evaporator tray located at the back.
Guidelines for cleaning interior surfaces, shelves, and storage bins.
How to clean glass shelves without damaging plastic components.
Instructions for cleaning the bottle rack.
Recommendations for cleaning ice storage bins and discarding old ice.
Warnings about using specific cleaning products on plastic and metal components.
Steps for safely removing trays and fixed bins from the refrigerator.
Instructions for correctly re-clipping trays and bins onto runners.
Important information about pre-lubricated runners and cleaning them.
How to clean permanently fixed bins in specific refrigerator models.
Steps to take before leaving the refrigerator unattended for extended periods.
Descriptions of common sounds like fan airflow, cracking, and running water.
Reasons for unusual sounds such as cabinet instability or items rattling.
Common sounds associated with the ice maker's operation.
Proper methods for storing raw and cooked red meat to prevent contamination.
Guidelines for storing fresh and cooked poultry, including stuffing advice.
Best practices for storing fresh fish, fillets, and shellfish.
How to store leftovers to maintain quality and prevent drying out.
Tips for storing produce, including temperature considerations and humidity control.
Tips for optimal freezing, including quality, temperature, and space utilization.
Guidance on freezing quantities, thawing, and stuffing poultry.
Advice on selecting, packaging, and freezing fresh fish.
Tips for freezing vegetables, including blanching and handling salad vegetables.
Foods recommended and not recommended for freezing.
How to choose, pack, and store fruit for freezing.
Steps to diagnose why the appliance is not turning on, checking power and fuses.
Troubleshooting steps for a non-functional interior light, including bulb replacement.
Checking for Sabbath Mode or other issues if the light and display are off.
Causes and solutions for the motor running excessively, like frequent openings.
Diagnosing and fixing issues with compartments being too warm, checking settings and seals.
Addressing the issue of food freezing in the refrigerator compartment.
Troubleshooting unusual sounds, checking cabinet stability and defrost cycles.
Understanding condensation in bins and how to manage excess moisture.
Information that warm cabinet sides are a normal operational characteristic.
Explanation that a warm spot on the central door seal is normal.
Causes and solutions for condensation forming on the exterior of the appliance.
Addressing condensation inside the fresh food compartment.
Troubleshooting ice buildup, often caused by a freezer door not closing tightly.
How to resolve taste or odor issues in ice cubes, often related to food packaging or cleaning.
Guidance on addressing door handles that have moved out of alignment.
Troubleshooting trays or bins that do not slide smoothly, often due to packaging.
Diagnosing and understanding sounds from the ice maker operation.
Steps to troubleshoot why the automatic ice maker is not functioning.
Troubleshooting slow ice production, checking temperature and door closure.
Solutions for wet ice or clumping, involving tapping or emptying the ice bin.
Resolving taste or odor issues in dispensed water, often related to extended periods of non-use.
Troubleshooting the water dispenser, including checking supply, filter, and dispenser lock.
Reasons for warm water from the dispenser, such as extended non-use or tank capacity.
What to do when the filter warning light indicates a need for replacement or recalibration.
Steps to recalibrate the Measured Fill feature if the dispensed amount is inaccurate.
Addressing dripping from the dispenser, often caused by trapped air or a new filter.
Details on Fisher & Paykel's commitment to repair or replace defective parts within two years.
List of circumstances and issues not covered by the manufacturer's warranty.
Information on how warranty service is provided by authorized agents.
Self-help steps to check before contacting customer care for assistance.
Contact details and service centre information for New Zealand customers.
Contact details and service centre information for Australian customers.
Contact details and service centre information for UK customers.
Contact details and service information for customers in Ireland.
Contact information for customers outside NZ, AU, and UK, plus website details.
Information required when contacting customer care, such as model and serial number.











