Fisher & Paykel RS90A1 User Manual

Installing your Appliance
• Your product is fitted with front and rear rollers designed for moving the product in the forwards and backwards
direction.
• Avoid moving the product in a sideways direction as this may damage the rollers or the floor covering/surface.
1. Adhere power cord clip to the appliance rear. Connect the appliance to a power supply and turn on.
2. Ensure excess power cord length is secured onto the clip.
3. Gently push the appliance into the enclosure. Take care not to roll over or damage power cord and/or water tubing.
Ensure water tubing is routed away from any sharp objects, sharp corners (beware of
kinking the tube as this will stop water flow), and not in
a location where it can be kinked or squashed.
https://producthelp.fisherpaykel.com/eu/Cool/Fridges/Bottom_Freezer/Without_Ice_and_Water/900mm/RS90A1/Installation_…
Updated: Wed, 12 Apr 2023 07:17:15 GMT
Powered by
1

Fisher & Paykel RS90A1 Specifications

General

Freezer Location	Bottom
Color	Stainless Steel
Adjustable door shelves	Yes
Adjustable glass shelves	Yes
Covered door shelves	Yes
Door alarm	Yes
Front levelling feet	Yes
LED lighting	Yes
Rear rollers	Yes
SmartTouch control panel	Yes
Spill proof removable bins	Yes
Bottle chill	Yes
Fast freeze	Yes
Large plastic bins	Yes
Total Net Volume	503L
Freezer Net Volume	141L
Refrigerator Net Volume	362L
Capacity	503L
Defrost System	Automatic
Shelves Material	Glass
Height	1790mm
Width	900mm
Fruit and vegetable bins	Yes