Need help?Do you have a question about the Fisher & Paykel RS80A1 and is the answer not in the manual?
General| Finish | Stainless Steel |
|---|---|
| Number of Doors | 2 |
| Defrost System | Frost Free |
| Freezer Location | Bottom |
| Adjustable Shelves | Yes |
| Refrigerant | R600a |
| Total Capacity | 20.5 cu. ft. |
| Total Net Volume | 20.5 cu. ft. |
| Freezer Net Volume | 6.5 cu. ft. |
| Refrigerator Net Volume | 14.0 cu. ft. |
| Shelves | Glass |
Lists tools provided with the appliance for installation.
Lists tools needed for the installation process.
Describes available door panel sets for stainless steel options.
Describes available door panel sets for custom options.
Instructions for fitting the anti-tip bracket securely to the wall.
Details for solid wall and plaster board wall installation of the bracket.
Step-by-step guide to removing hinge end caps from the appliance doors.
How to push the appliance into the cabinetry and secure it with the anti-tip bracket.
Adjusting appliance alignment and levelness within the cabinetry.
Instructions for attaching handles to the stainless steel door panels.
Securing the hanging and side brackets to the door panels.
Connecting the external display module for water dispensing models.
Steps for hanging and temporarily securing the stainless steel door panels.
Fine-tuning the alignment and flushness of the stainless steel door panels.
Guide on using the template for custom door panel drilling locations.
Template usage for the right-hand side custom door panel.
Template usage for the custom drawer panel.
Steps for preparing custom door panels including handles and brackets.
Instructions for attaching the prepared custom door panels.
Fine-tuning the alignment of custom door panels within the cabinetry.
Securing the appliance to the cabinetry using hinge brackets and adjusting feet.
Reattaching the hinge end caps after installation.
Step-by-step guide for installing the water filter cartridge.
Instructions for fitting the toe kick filter and grille onto the appliance.
Installing covers and trims on doors and drawers for a finished look.
To Next Page