7
INSTALLATION GUIDE
Accessories
Check if you received the following accessories with your Fisher&Paykel washer. Youwill
find them inside the drum or attached to the packaging.
z
1 x hot inlet hose (grey with red connectors) for WH8560F, WH8560P2, WH8060F,
WH8060P2 and WH7560P
z
1 x cold inlet hose (grey with white connectors) for all models.
z
4 x Plastic plugs to cover transit bolt holes
z
1 x Drain hose guide
Unpacking
Your washer is heavy, we recommend two people to remove the packaging.
To ensure the best performance from your new washer please follow the steps below before
using your washer.
1 Remove the outer packaging including the polystyrene
packer and plastic wrapping.
2 Lift the washer off the base.
3 Remove all packaging and accessories from inside the
drum.
4 Dispose of all packaging sustainably, ensuring these
materials are kept out of the reach of children.
To Next Page
Loading...
