To Next PageTo Next Page
Need help?Do you have a question about the Fisher 3582 and is the answer not in the manual?
General| Enclosure Rating | NEMA 4X, IP66 |
|---|---|
| Temperature Range | -40 to 85°C (-40 to 185°F) |
| Action | Direct or Reverse |
| Type | Pneumatic |
| Input Signal | 3-15 psi (0.2-1.0 bar) |
Defines the scope and purpose of the instruction manual.
Provides a detailed explanation of the Fisher 3582, 3582i, and 3583 units.
Details the various input signal ranges and output signal types for the positioners.
Covers operative temperature limits, supply pressure, and air consumption specs.
Lists hazardous area classifications for the 582i and 3582 units.
Information on training courses available for the products.
Provides essential safety and installation instructions.
Details hazardous area classifications for CSA (Canada) and FM (USA).
Outlines ATEX and IECEX certification standards and conditions.
Instructions for mounting the positioners and transmitters on various actuators.
Guides for making pressure and supply line connections.
Instructions for wiring the 3582i electro-pneumatic valve positioner.
Explains cam types and their effect on valve flow characteristics.
Covers changing positioner action and using bypass features.
Step-by-step procedures for beam alignment and unit calibration.
Describes the operating principle of the 3582 pneumatic valve positioner.
Explains the operating principle of the 3582i electro-pneumatic valve positioner.
Details the operating principle of the 3583 valve stem position transmitter.
Instructions for changing range springs and replacing gaskets.
Procedures for replacing nozzle O-rings and the pneumatic relay.
Guides for replacing 582i converter parts and removing/reassembling it.
Information on ordering spare parts and available repair kits.
Comprehensive list of common and specific parts for the units.
Provides loop schematics for wiring intrinsically safe installations.
