Fisher 3582 - Parts and Schematics; Parts Ordering and Kits

Instruction Manual
D200138X012
3582, 582i, and 3583
February 2015
40
6. Plug the output connection and apply 2.4 bar (35 psig) to the supply pressure connection.
CAUTION
Do not apply a signal greater than 35 mA to the I/P module. Higher signal values may damage the converter module.
7. Apply a 20 milliampere DC current input signal to the converter.
8. Check for leaks using a soap solution. Check any components which were disassembled or disconnected.
Parts Ordering
A serial number is assigned to each valve positioner or valve stem position transmitter and is stamped on the
nameplate. Always refer to this number when corresponding with your Emerson Process Management sales office
regarding spare parts or technical information. When ordering parts, also give the eleven‐digit part number shown in
the following parts list.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Process Management should
not, under any circumstances, be used in any Fisher instrument. Use of components not supplied by Emerson Process
Management may void your warranty, might adversely affect the performance of the instrument, and could cause personal
injury or property damage.
Parts Kits
Description Part Number
Repair kit for positioner/transmitter (not for 3582NS)
Kit contains keys 11, 16, 17, 33B, 34C, 73, and 104.
This kit also contains keys 18C, 18E, and 18F
for 3580 and 3581 positioners
For standard temperature applications R3580X00022
For high temperature applications R3580X00032
Repair kit w/nozzle and flapper for the 3582 Positioner
Kit contains keys 11, 16, 17, 18, 19B, 19E,
33B, 34C, 73, and 104.
For standard temperature applications,
not for 3582NS R3582X00012
For high temperature applications,
not for 3582NS R3582X00022
For 3582NS, contains EPDM parts R3582X00032
Description Part Number
Repair kit for 582i electro‐pneumatic converter
Kit contains keys 3, 5, 6, 8, 20, and 23 R582X000012
Replacement kit for 83L Relay
Kit contains relay, gaskets and mounting screws (key 32 in
figure 21, keys 10, 13, and 15 in figure 23)
For 3582 except 3582NS, std. const. R3580XRS012
For 3582 except 3582NS,
Remote Vent, std. temp. R3580XRR012
For 3582 except 3582NS,
hi‐temp. const. R3580XRH012
For 3582 except 3582NS,
Remote Vent, hi‐temp. R3580XRR022
For 3582NS R3580XNS012
For 3583, std. const. R3580XRS022
For 3583, hi‐temp. const. R3580XRH032