Fisher 546 - Specifications; Educational Services

Instruction Manual
D200108X012
546 Transducer
March 2015
4
Figure 2. FM and CSA Approvals Nameplate for Fisher 546
WARNING
The 546 transducer does not meet third party approvals (CSA or FM) for use with natural gas as the supply medium. Use of
natural gas as the supply medium can damage the instrument and result in personal injury or property damage from fire or
explosion.
The 546 does not meet third party approvals for use with natural gas. Should you need an instrument for use with
natural gas, the Fisher i2P‐100 transducer meets third party approvals for use with natural gas as the supply medium.
Contact your Emerson Process Management sales office for information on this product.
Specifications
Specifications are listed in table 1.
Educational Services
For information on available courses for 546 transducers, as well as a variety of other products, contact:
Emerson Process Management
Educational Services, Registration
Phone: +1-641-754-3771 or +1-800-338-8158
e‐mail: education@emerson.com
http://www.emersonprocess.com/education