Lit. No. 43069, Rev. 05 8 May 1, 2019
86000, 86000-1, 86100(CH), 86100-1(CH), 86200, 86205, 86205-1, 86300, 86400
86600-3, 86610-3(CH), 87000, 87000-1, 87100, 87200, 87300, 87400, 87600-3
8. For 7.5'/8.5'/9.5' Blades: Install the center snow
defl ector using two 3/8" x 1-1/4" cap screws and
3/8" locknuts.
For 10.5' Blades: Install the center snow defl ector
using three 3/8" x 2" cap screws and 3/8" locknuts.
3/8" x 1-1/4"
Cap Screw
Pivot
Pin
3/8"
Locknut
3/8"
Locknut
Pivot
Pin
3/8" x 2"
Cap Screw
9. Install the blade guides, using two 7/16" lock
washers and two 7/16" nuts for each guide.
Blade Guide
7/16" Lock
Washers
7/16" Nuts
To Next Page
Loading...