4
Quick Start
Before you begin, set the controls as shown:
1. Plug in • Use a ¼-inch instrument cable.
2. Tune up • Press and hold the Volume knob until the tuner comes on. When
engaged, the Tuner
mutes the output. Press
Volume
to exit Tuner.
3. Turn up • Raise the Volume to a desirable level.
4. Select an Image Preset • Press the Tone control repeatedly to select
presets 1, 2 and 3. Press again to select the dry pickup (which is displayed as “P”).
5. Adjust Tone • Turn the Tone control clockwise to blend in a “mid-scooped”
tone with emphasized bass & treble and reduced midrange.
To Next Page
Loading...
