8
Performance Mode
For the more adventurous player, we’ve created a much deeper control interface
called Performance mode. This mode gives you full access to an extensive
set of tone shaping controls. And to make things easier while you perform,
we’ve grouped some controls into Play and the rest into Edit. Play and Edit are
described on the following pages.
Entering Performance Mode
F1 Aura
+
is shipped from the factory to power up in Easy Mode (page 6). To
change the preamp to power-up into Performance Mode:
1. Press + hold the Edit knob (Tone control) while plugging in the guitar.
Continue to hold the Edit knob down when the tuner displays the letter “R” and
then the letter “P”.
2. While still holding the Edit knob, press the Volume knob. Release both knobs.
Performance mode is selected when the “P” stops fl ashing and the unit returns
to normal operation.
To Next Page
Loading...
Need help?
General