Fishman SA330x - Technical Specifications

15
Technical Specifications
Input Impedance:
1/4” Input 5M Ohm
XLR Input 3k Ohm Balanced
Aux Input (stereo) 10k Ohm
Tone Controls and Anti-Feedback:
Low ±12.5dB @ 50Hz (resonant)
Mid ±10.5dB @ 750Hz (resonant)
High ±12.5dB @ 10kHz (shelving)
Anti Feedback range -14dB @ 15Hz – 330Hz (Hi-Q resonant notch)
Channel 1 & 2 D.I. Output:
Output Impedance 600 Ohm balanced
Phantom power tolerant, ground isolated
Mix D.I. Output:
Output Impedance 600 Ohm balanced
Phantom power tolerant, ground isolated
Sub Output:
Output Impedance 600 Ohm balanced
Phantom power tolerant, ground isolated
Speaker System:
Woofer Six 4” patented dual-gap with neodymium magnet
Tweeter 1” soft dome, neodymium magnet
Tweeter Level Up to 6dB cut @ 10kHz
Crossover Bi-amplied with active crossover
100Hz High-pass lter when Sub Out connected
Amplifier:
Woofers 280W rms; 484W peak
Tweeter 50W rms; 100W peak
Frequency Response 71Hz – 20kHz
Power Consumption: 300W max
Physical:
Dimensions 41.4” H x 5.5” W x 6.7”D
105.2cm H x 14.0cm W x 17.0cm D
Weight 20lbs (9.1 kg) without stand and carry bag
Specifications and information in this manual subject to change without notice.