8
For more detailed instructions please visit www.fishman.com/tripleplay
TriplePlay Hardware Installation Quick Start (continued)
Mounting the hex-pickup on your guitar:
Each of the supplied Pickup Mounts have a
different thickness to facilitate proper
spacing between the pickup and strings.
Test fit each mount to determine the best fit - simply
snap the hex-pickup into the Pickup Mount, then
slide that assembly under the strings just in front of
the bridge. The hex-pickup should be as close to
the strings as possible without touching them.
1
Pay close attention! The next 6 steps are critical.
Setting the correct spacing between the hex-pickup and guitar strings is essential for
achieving the best accuracy and performance. If the hex-pickup is too far away from the
strings, the TriplePlay controller will have trouble detecting notes properly. If the
hex-pickup is too close to the strings, the controller can trigger notes unpredictably
with wide pitch fluctuations. Follow the steps below to ensure that you have the correct
spacing.
To Next Page
Loading...
