9
For more detailed instructions please visit www.fishman.com/tripleplay
TriplePlay Hardware Installation Quick Start (continued)
Mounting the hex-pickup on your guitar:
Use the Guitar-Shaped Spacer Tool to check
how close the hex-pickup is to the strings.
It’s important to get the spacing such that
the tool can slide between the hex-pickup and strings
with very little additional space. The spacing is too
close if you have to force the tool between the
strings. You’ll have the opportunity to make micro
adjustments in step 6.
2
Note: If the spacing is too close to the strings, despite any micro adjustments, consider replacing
the Pickup Mount with one of the other mounts provided. In rare cases, the strings are too close
to the guitar body to allow the correct spacing between the hex-pickup and strings. If this is the
case, you may need to adjust the height of the bridge or possibly adjust the neck of your guitar.
We strongly suggest to have an experienced guitar technician make these adjustments for you.
To Next Page
Loading...
