11
For more detailed instructions please visit www.fishman.com/tripleplay
TriplePlay Hardware Installation Quick Start (continued)
Mounting the hex-pickup on your guitar:
There are small screws on either side of
the pickup that, when turned, will raise or
lower the hex-pickup for micro adjust-
ments. Turn the screws until the spacing allows the
Guitar-Shaped Spacer Tool to slide between the
hex-pickup and strings with very little additional
space.
6
Re-check the spacing between the pickup
and strings with the Guitar-Shaped Spacer
Tool. The tool should slide between the
hex-pickup and strings with very little additional
space. The spacing is too close if you have to force
the tool between the strings.
5
To Next Page
Loading...
