Why are all buttons on my Flama 1266FL flashing?
If all the buttons on the panel of your Flama Coffee Maker are flashing, this indicates that it's time to clean the water circuit. You should proceed with descaling as described in the 'Cleaning mineral residues/descaling' instructions.
What to do if coffee buttons flash quickly on my Flama 1266FL?
If the coffee buttons on your Flama Coffee Maker are flashing very quickly, it means the temperature has risen significantly after using the steam function. Allow the machine to cool down.
Why is my Flama 1266FL Coffee Maker not frothing the milk well?
Your Flama Coffee Maker may not be frothing the milk well because the milk you're using isn't suitable, or the steam function was activated too early. Use whole milk and ensure that you only use the steam function when the steam indicator light stops flashing.
Why is no steam coming out of my Flama 1266FL?
If no steam is coming out of your Flama Coffee Maker, it could be due to a blocked steam tube, the steam selector not being in the correct position, or the preheating process not being complete. Use a thin wire to clean the inside of the steam tube after each use. Also, turn the steam selector to the steam position and wait for the preheating process to complete.
What to do if coffee is not properly brewed in my Flama 1266FL?
If your coffee is not being properly brewed in your Flama Coffee Maker, it may be due to using too much or too little coffee in the filter. One coffee requires one teaspoon of coffee, pressed well. The coffee shouldn't be too finely or coarsely ground, as coarse grounds are difficult to extract, and fine grounds affect the coffee's quality and quantity.
How to fix too smooth coffee from Flama 1266FL Coffee Maker?
If the coffee from your Flama Coffee Maker is too smooth, it could be that the coffee isn't ground sufficiently or not pressed well enough. Try using a different type of ground coffee, or use the doser/presser to press the coffee better.
How to fix no coffee coming out of Flama Coffee Maker?
If no coffee is coming out of your Flama Coffee Maker, it could be because there is no water in the tank, or the tank is not installed properly, or the machine hasn't warmed up. Fill the water tank and switch on the appliance. The machine needs to be hot before brewing coffee.
General| Model | 1266FL |
|---|---|
| Category | Coffee Maker |
| Type | Drip Coffee Maker |
| Coffee type | Ground coffee |
| Material | Plastic |
| Color | Black |
| Water tank capacity | 1.25 liters |
To Next Page
