What to do if my Flama 1319FL does not turn on?
If your Flama Dehumidifier isn't turning on, there are several potential reasons: * Ensure it's properly plugged into a working wall outlet. * Check if the water tank is full; if so, empty it. * Make sure the water tank is correctly placed in the appliance. * The appliance might be in protection mode if the temperature is below 5°C or above 35°C.
Why is my Flama 1319FL Dehumidifier performing poorly?
If your Flama Dehumidifier's performance is poor, it might be due to: * A clogged air filter. Clean the air filter to resolve this. * Obstructions in the air intake or outlet ducts. Remove any obstructions to ensure proper airflow.
Why Flama Dehumidifier has little dehumidifying capacity?
If your Flama Dehumidifier has a reduced dehumidifying capacity, consider these possible causes: * A dirty air filter may be restricting airflow. Clean the filter. * The air intake or outlet might be blocked. Clear any obstructions.
How to fix noise coming from Flama 1319FL?
If your Flama Dehumidifier is making unusual noises, here are a couple of things to check: * Ensure the appliance is placed on a stable, level surface. * A clogged air filter can also cause noise. Try cleaning the air filter.
What to do if Flama 1319FL Dehumidifier displays error code LO?
The Flama Dehumidifier displays 'LO' when the ambient humidity is below 20%. The dehumidifier turns off to protect itself.
General| Noise level | Unknown |
|---|---|
| Dehumidification Capacity | 12 l/24h |
| Tank Capacity | 2 l |
| Power Consumption | 200 W |
| Air Flow | 100 m³/h |
To Next Page
