Why is my Flama 5501FL not heating up?
If your Flama Iron isn't heating up, first, ensure it's properly plugged into the wall outlet. If it is, check the temperature setting; it might be too low. Try increasing the temperature using the temperature button. If these steps don't work, it could be a blown fuse, in which case you should contact technical assistance.
Why is the temperature indicator not lit on my Flama 5501FL Iron?
If the temperature indicator on your Flama Iron isn't lit, start by checking if the appliance is correctly plugged into the wall outlet. If it still doesn't light up, the fuse may have burned out, and you should contact technical assistance.
What to do if no steam is coming out of my Flama 5501FL?
If no steam is coming out of your Flama Iron, the water tank might be empty. Try pouring water into the water tank. Also, the pump might still be drawing water from the tank. Hold down the steam button to allow water to pump into the iron; this may take about a minute.
What to do if excess water drips from the sole plate of my Flama 5501FL Iron?
If excess water drips from the sole plate of your Flama Iron, it's likely due to condensation inside the sole plate. Allow the iron to heat to the selected temperature before you start using it.
To Next Page
General