Flama 5501FL - General Information

19
English
DESCRIPTION
1. Generator base
2. Water tank with handle
3. Thermal insulaon support
4. Storage and transport lock
5. Iron
6. Temperature buon
7. Steam buon
8. Connuous steam buon
9. Temperature indicator
10. Base of the iron
11. Cable organizer
12. An-limestone lter
GENERAL INFORMATION
WARNING
During or aer ironing, never rest the hot
base of the iron anywhere besides the
thermal insulaon support.
Temperature buon
Rotate the temperature buon to set
the ironing temperature according to the
fabrics to be ironed.
Min - Minimum temperature posion. In
this posion steam ironing may not be
used.
• - Indicated for synthec bers and silks.
In this posion steam ironing may not be
used.
•• – Indicated for wool. In this posion
steam ironing may not be used.
••• - Indicated for coon and linen.
Max - Maximum temperature posion.
Steam buon
When the appliance has heated to the
temperature selected and the temperature
indicator goes o, press the steam buon
Release the steam buon to dry iron,
without steam.
Connuous steam buon
Move the connuous steam buon forward
for connuous steam output without
having to press the steam buon.
To stop connuous steam delivery, move
the Connuous Steam Knob backwards.
Temperature indicator
When you plug in the appliance, the
temperature indicator lights up. As soon as
the iron reaches the selected temperature,
it will turn itself o. The temperature
indicator will go o and on while the
appliance is in use, to indicate that it is
operang correctly.
Water tank
Before lling the tank with water, make
sure that the appliance is unplugged.
NOTE: We recommend that you use tap
water instead of demineralized water,
which can aect the generator’s internal
sensors and prevent the pump from
working properly.
WARNING! Do NOT ll the water tank with
hot water.
WARNING! Never add descaling, aromac,
alcoholic or detergent products, which may
damage the device or make it unsafe to use.