14 www.ama.pt
DESCRIPTION
1. ON/OFF switch / light indicator
2. cover open buon
3. Handle
4. Cover
5. water level indicator
6. power base
7. Body
8. Filter
IMPORTANT ADDITIONAL
INFORMATION
Never immerse the Kele or the hopper
base in water or any other liquid.
Clean the outside of the Kele and the Feed
Base with a dry, absorbent cloth.
Before pung the Kele back into
operaon, unplug the plug from the socket
and wipe o the water with a dry, absorbent
cloth.
Never run the Water Kele with the power
base wet.
OPERATION
This product was designed to make its use
simple, praccal, ecient and safe.
Wireless device: maximum ease of use,
cleanliness and security. The power cord is
independent from the electric kele.
Lid safety lock: ensures the lid does not
open when pouring water.
Auto-o: the kele switches o
automacally when the water starts boiling.
Maximum level indicaon: the water level
indicator, indicates the maximum amount
of water that the electric kele can take
(1.7lt).
Level indicator: shows the amount of water
that is inside the electric kele.
Cable winder: for easy storage, wrap the
cable around the boom of the power base.
Before rst use
Clean the inside of the kele and then boil
water (at least once). Discard the water
from the 1st boil.
During the rst use it can release some
odours, which is perfectly normal.
Use
Unwind the power cord from the power
base.
Place the pad on a at surface away from
hot surfaces or ames.
Open the kele lid by pressing the lid
opening buon to unlock the lock.
Fill the electric kele with water, outside
the power base.
Never exceed the maximum level indicator,
that is, do not ll with more than 1.7 litres.
Use the level gauge to check how much
water is in the kele.
Close the lid completely. Never operate the
kele with the lid open, as the “auto power
o” system only works with the lid closed.
Place the electric kele on the power base,
ng it snugly into the adapter.
Press the on/o switch to turn on the kele.
The indicator light turns on indicang that
the kele has started up.
As soon as the water boils, the jar will
automacally turn o. The indicator light
turns o.
Remove the electric kele from the power
base using the handle to move it.