Please keep this User Manual for future
another user, be sure that they also receive
this instruction booklet.
Unpack and check carefully there is no
transportation damage before using the
Before operating, ensure that the voltage
and frequency of power supply match the
It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
Disconnect main power before servicing
and maintenance.
only, but always by taking its base.
Don’t operate it where the temperature is
higher than this.
In the event of serious operating problem,
carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare
parts.
Do not connect the device to any dimmer
pack.
Do not touch any wire during operation
and there might be a hazard of electric
shock.
To prevent or reduce the risk of electrical
rain or moisture.
visibly damaged.
Do not look directly at the LED light spot
2. SAFETY INFORMATION
1. INTRODUCTION
Logo 200W IP65
User Manual •Instrukcja Obsługi
IMPORTANT!
Do not point strong light output from other fixtures
at the LOGO 200W IP65, as intense illumination can
damaged the display.
WARNING!
Lenses can focused sunlight and strong light, presenting a risk of re and damage to the xture.
Shield or shade the head if necessary.
To Next Page
Loading...
Need help?
General
