FlashLogic FLCAN - Push To Start Vehicle Take Over Procedure

NOTICE
WARNING: READ BEFORE REMOTE STARTING THE VEHICLE
IMPORTANT
I All vehicle doors must be closed and locked prior to remote start sequence. Failure to comply will result in remote starter malfunction.
PUSH TO START VEHICLE TAKE OVER PROCEDURE - TO THE VEHICLE OWNER
!
Failure to follow procedure within time restriction will
result in vehicle engine shutdown.
3
Push to Start vehicle take over
procedure completed.
2
TIME RESTRICTI  N
Within 45 SECONDS from
previous step:
Open vehicle door.
Enter vehicle.
Close vehicle door.
Press and release BRAKE pedal.
NOTE
I All vehicle doors must be closed and locked prior to remote
start sequence.
1
Press UNLOCK on after-market
remote.

TIME RESTRICTI  N COMING UP !
Page 12 of 12 FLC-AL(DL)-MA2-EN 20130227
INSTALL GUIDE
WWW.FLASH-IT.COM Audiovox Electronics Corp. © 2013
ALL IN ONE
Mazda
Doc. No.: ##11050##