To Next PageTo Next Page
Need help?Do you have a question about the Flavel Rhapsody and is the answer not in the manual?
General| Brand | Flavel |
|---|---|
| Model | Rhapsody |
| Category | Indoor Fireplace |
| Language | English |
Details on model, gas type, injectors, pilot type, heat input, pressure, ignition, and weight.
Legal requirements, building regulations, and codes of practice for safe gas appliance installation.
Requirements for conventional brick, lined chimneys, and metal flue boxes, including minimum dimensions.
Guidelines for hearth, non-combustible surrounds, and wall coverings near the appliance.
Specifies minimum distance and overhang limits for combustible shelves above the appliance.
Checklist for inspecting chimney condition, obstructions, and ensuring proper updraught.
Specifies required dimensions for fireplace opening and catchment space for safe operation.
Instructions for installing the appliance into specific types of metal flue boxes.
Requirements for hearth material, thickness, and dimensions for safe installation.
Guidance on installing into pre-cast flues, including depth requirements and surround considerations.
Explanation of the atmosphere sensing system and warnings about its operation and replacement.
Instructions for carefully unpacking the appliance and checking its contents against a packing list.
Guidance on establishing the flue type and installing the fire box into various chimney and flue systems.
Procedures for checking gas tightness and inlet pressure for manual control models.
Procedures for checking gas tightness and inlet pressure for slide control models.
Procedures for checking gas tightness and inlet pressure for remote/EFC models.
Step-by-step guide to assembling the ceramic fuel bed and coals for coal models.
Step-by-step guide to assembling the ceramic fuel bed and pebbles for linear models.
Instructions for lighting the fire using manual controls.
Instructions for lighting the fire using slide controls.
Guide on fitting batteries for remote and EFC models.
How to operate the fire manually using the control valve.
Instructions for lighting the fire using the remote control.
Instructions for lighting the fire using the electronic fire control (EFC) system.
Procedure for performing a smoke test to ensure safe combustion product evacuation.
Instructions for fitting the trim on specific model ranges.
Instructions for fitting trim or fascia on specific model ranges.
Instructions for fitting the trim on Caress models.
Instructions for fitting the fender on specific models.
Step-by-step guide to safely remove the burner assembly for maintenance.
Procedure for removing and replacing the piezo igniter.
Instructions for removing the control tap assembly for servicing or replacement.
Guidance on removing the Oxy-Pilot assembly, noting thermocouple replacement constraints.
Specific instructions for removing the burner assembly for slide control models.
Procedure for removing the battery ignitor unit.
Instructions on how to replace the battery in the appliance.
Steps for replacing the control cable assembly.
Instructions for removing the burner assembly for remote/EFC models.
Procedure for removing the main valve assembly.
Guidance on removing the pilot assembly, noting thermocouple replacement constraints.
Steps for replacing batteries located within the firebox.
Instructions for removing and replacing the trim switch.
General information regarding installation conditions, shelf placement, and ventilation requirements.
Introduction to the fire's features and initial use.
Critical safety warnings, including fireguard use and regular servicing requirements.
Step-by-step guide to lighting and operating the fire using manual controls.
Step-by-step guide to lighting and operating the fire using slide controls.
Instructions for operating the fire using the remote control handset.
Instructions for operating the fire using the electronic fire control (EFC) system.
How to operate remote/EFC models manually via the control valve.
Step-by-step guide for replacing batteries in remote/EFC models.
Instructions for replacing the battery in slide control models.
Explanation of the spillage monitoring system and actions to take if it activates.
Important warnings and advice before cleaning the appliance.
Methods for cleaning trims and painted metal parts, including warnings.
Advice against cleaning fuel bed components and how to handle damaged parts.
Step-by-step guide to assembling the fuel bed and ceramics for coal models.
Step-by-step guide to assembling the fuel bed and ceramics for pebble models.
Advice on diagnosing issues based on indicator light flashes before calling for service.
