Flavel Caress HE User Manual

Caress HE
COAL EFFECT HIGH EFFICIENCY GAS FIRE
Installation, Maintenance & User Instructions
Hand these instructions to the owner following installation, they
must be retained for future reference.
Model No’s FHEC**MN, FHEC**SN & FHEC**RN2 are only for use on
Natural Gas (G20) at a supply pressure of 20 mbar in G.B. / I.E.
Model No’s FHEC**SP only for use on Propane Gas (G31) at a supply
pressure of 37 mbar in G.B. / I.E.
** denotes trim and fret variant

Flavel Caress HE Specifications

General

Brand	Flavel
Model	Caress HE
Category	Indoor Fireplace
Language	English

Summary

Product Specifications and Installation Requirements

Appliance Overview and Technical Data

Details on fuel type, heat output, efficiency, and physical dimensions of the fire models.

Installation Conditions and Regulatory Compliance

Legal and regulatory requirements, building codes, and standards for safe gas appliance installation.

Gas Fire Installation Guide

Post-Installation Gas Tightness Testing

Essential procedures for performing gas tightness and inlet pressure tests after installation.

Fuel Bed Assembly and Initial Operation

Lighting Procedures for Control Variants

Step-by-step guides for lighting the fire using manual, slide, and remote controls.

User Operation and Troubleshooting Guide

Important Safety Information and Warnings

Crucial safety warnings regarding naked flame, fireguards, servicing, and combustible materials.

Operating the Fire with Different Control Types

Step-by-step guides for operating the fire using manual, slide, and remote controls.