EasyManua.ls Logo

FLAVIA CREATION 200 - Preparing a Beverage;Drink; Brewing Cappuccino; Latte Drinks

FLAVIA CREATION 200
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENG
LARGE/TRAVEL MUG FACILITY
P R E P A R I N G A B E V E R A G E / D R I N K
8
To vend your drink into a large mug or travel mug, remove the drip tray, place your mug and follow the
normal drink making steps.
HOT WATER FACILITY
Your Brewer can also vend hot water if required,
With no filterpack In place. press and hold the 'HOT WATER' button. Hot water will begin to flow whilst
the button Is pressed. Release the button to stop the water flow. The hot water dispense will
automatically stop after a maximum vend volume has been reached If the button Is not released.
Cappuccino drinks are made using two packs, firstly a Cappuccino/Latte Swirl followed by the
coffee of your choice.
Follow S
teps 1-5 above.
At Step 2 the ‘CAPUPUCCINO/LATTE’ category should be selected.
At S
tep 4 a ‘CAPUPUCCINO/LATTE SWIRL’ filterpack should be inserted
S
tep 6
At the end of the Cappucino/Latte Swirl pack (Pack 1 of 2), the ‘INSERT/REMOVE PACK’ indicator
will flash. This is a prompt for you to remove the empty first pack and insert the second filter
pack., which should be a FLAVIA coffee filterpack.
Lift the handle, remove the first empty Cappucino/Latte Swirl pack and insert the coffee
filterpack. Close the handle firmly. The Brewer will now start to brew the coffee pack for your
beverage.
It is important that the packs are placed in the correct order. Please see the packs for further
information.
S
tep 7
Lift the handle and remove the filterpack for disposal.
BREWING CAPPUCCINO / LATTE DRINKS
All seven lights will briefly flash on the Brewer to indicate when your beverage is ready, after
which the drink selection lights will be lit.
Note
9
C O M M E N T P R O F I T E R A U M A X I M U M DE L A P P A R E I L
DE L’EAU PURE POUR OBTENIR DES BOISSONS SAVOUREUSES, À CHAQUE FOIS
LES SACHETS
Pour obtenir une boisson chaude au goût exquis dans chaque gobelet, remplacez le filtre FLAVIA® tous
les trois mois. Les cartouches filtrantes FLAVIA® aideront à protéger votre appareil à boissons FLAVIA®
CREATION et à en prolonger la vie. Les échangeurs d’ions non traités et le charbon actif que contient
le filtre réduisent la présence de métaux lourds et d’autres contaminant, de même que des substances
telles que le chlore, qui pourraient altérer la saveur et l’arôme de votre boisson chaude. Le filtre va
directement dans le réservoir et son installation ne requiert pas d’accessoires additionnels. De plus, il
n’occupe pas d’espace supplémentaire sur le comptoir.
Veuillez contacter le service clientèle pour obtenir des détails sur la façon de commander des filtres de
rechange FLAVIA®.
On doit entreposer les sachets dans un endroit frais et sec.
S’ils ne sont pas ouverts, vos sachets resteront frais et continueront à fournir d’excellentes boissons
jusqu’à la date limite de fraîcheur indiquée à l’arrière du sachet.
O
n ne doit pas entreposer les sachets au réfrigérateur ni au congélateur.
GOBELETS ET TASSES
Pour éviter les renversements et les brûlures, veuillez vous assurer de toujours vous servir d’un gobelet
ou d’une tasse de la taille idéale. Cela réduira au minimum la distance existant entre le bord du gobelet
ou de la tasse et le dessous du sachet-filtre quand celui-ci est inséré. Afin de limiter les dégâts le plus
possible, veuillez éviter les gobelets à fond arrondi.
BOUTONS DE SÉLECTION DES BOISSONS
Votre appareil comporte des boutons de sélection, qui permettent de préparer une grande variété de
boissons.
70-41-2871 US C200 Ops Guide.qxd:OPS Guide US CAN Amend.qxd 22/7/09 09:16 Page 22

Other manuals for FLAVIA CREATION 200

Related product manuals