CHE 2-26 18.0-EC
13
Contents
Symbols used in this manual . . . . . . . . 13
Symbols on the power tool. . . . . . . . . . . 13
Technical data . . . . . . . . . . . . . . . . . . . . 13
Overview . . . . . . . . . . . . . . . . . . . . . . . . 14
Important safety information . . . . . . . . . 15
Noise and vibration . . . . . . . . . . . . . . . . 17
Instructions for use . . . . . . . . . . . . . . . . 17
Maintenance and care . . . . . . . . . . . . . . 21
Disposal information . . . . . . . . . . . . . . . 21
conformity . . . . . . . . . . . . . . . . . . . . 22
Exemption from liability . . . . . . . . . . . . . 22
Symbols used in this manual
WARNING!
Denotes impending danger. Non-
observance of this warning may result in
death or extremely severe injuries.
CAUTION!
Denotes a potentially dangerous situation.
Non-observance of this warning may result
in injury or damage to property.
NOTE!
Denotes application tips and important
information.
Symbols on the power tool
Before switching on the power tool,
read the operating manual!
Wear protective goggles!
Wear ear defenders!
Use lightweight breathing
protection!
Disposal information for the old
machine (see page 21)!
Technical data
Rechargeable
hammer drill
CHE 2-26
18.0-EC
Nominal voltage V 18
Battery AP 18.0 (5.0 Ah)
No-load speed rpm 980
No-load impact rate rpm 4,350
Max. single impact
energy (according to
“EPTA procedure
05/2009”)
J2.6
Lubrication Grease
Tool holder SDS-plus
Max. drill diameter
– concrete
– wood
– metal
mm
mm
mm
26
30
13
Weight according to
“EPTA Procedure
01/2003” (without
battery)
kg 3.18
Weight of battery 5.0 Ah kg 0.72
To Next Page
Need help?
General
