Flex DD 2G 18.0-EC LD User Manual

DD 2G 18.0-EC LD DD 2G 18.0-EC LD
PD 2G 18.0-EC LD PD 2G 18.0-EC LD
ELEKTROWERKZEUGE

Flex DD 2G 18.0-EC LD Specifications

General

Voltage	18 V
Speed Settings	2
Power Source	Battery
Chuck Size	13 mm
Max. Drilling Diameter (Wood)	38 mm
Max. Drilling Diameter (Masonry)	13 mm
Battery Type	Lithium-ion
Chuck Capacity	13 mm

Summary

Safety Symbols and Warnings

General Safety Precautions

Essential safety advice and warnings before operating the power tool.

Specific Safety Guidelines

Hammer Drill Safety

Safety instructions specific to hammer drill operation, including noise protection.

Long Drill Bit Usage

Safety recommendations for using long drill bits to prevent injury.

Technical Data and Overview

Tool Specifications

Detailed technical specifications for the drill driver and hammer drill.

Environmental Conditions

Getting Started: Battery

Battery Insertion and Removal

Instructions for inserting and removing the battery pack from the power tool.

Operating the Power Tool

Bit Installation and Removal

Direction Preselector Switch

Two-Speed Gear Shifter

Tool Settings and Controls

Torque Adjustment and Mode Selection

Using the torque adjustment ring and function selection for various tasks.

LED Indicator Lights

Power Tool Activation and Deactivation

Drilling Process Initiation

Guidance on starting the drilling process with the tool.

Drilling and Screw Driving Techniques

Wood Drilling Guide

Metal Drilling Guide

Screw Driving Best Practices

Tips for driving screws accurately and preventing damage.