Need help?Do you have a question about the Flex DD 2G 18.0-EC and is the answer not in the manual?
Defines warning and caution symbols indicating danger or potential hazards.
Explains note symbols for tips and symbols found on the power tool itself.
Read all warnings and instructions. Failure to follow may result in electric shock, fire or serious injury.
Details the specific applications and commercial use for which the tools are designed.
Covers proper grip, auxiliary handles, avoiding hidden wires, and workpiece security.
Addresses battery handling, heat exposure, fire hazards, leakage, and proper charging.
Recommends wearing ear defenders when impact drilling due to noise.
Covers voltage matching, plug safety, dry environments, and handling damaged chargers.
Ensures preselector switch is in middle position before work and controls are operated when tool is stopped.
Information on noise/vibration values and necessary protective measures like ear defenders.
Details technical specifications like torque, speed, drill diameter, and weight for different models.
Presents A-weighted sound pressure and power levels, and vibration emission values.
Illustrates and lists the main components of the PD 2G, DD 2G, IW 1/2", and ID 1/4" power tools.
Identifies battery types, belt clip, fastening screws, and bit clips shown in the diagrams.
Unpack, check parts, attach accessories, and ensure batteries are fully charged before first use.
Guides on fitting auxiliary handles and using the changeable drill chuck for tool insertion.
Instructions for assembling, locking, disassembling, and using the angle attachment.
Instructions for assembling, locking, disassembling, and using the bit holder attachment.
Details how to change tools on impact drivers using adapters and the tool lock mechanism.
Explains checking battery charge status and the process of inserting/replacing the battery.
How to set direction of rotation and operating mode (for PD 2G) when the tool is stopped.
Guides on adjusting speed and torque settings using the respective dials/switches.
Operation of the trigger switch for power, speed control, and switching the tool off.
Using mode switches to select torque/speed levels and changing between impact modes.
How to operate the integrated workplace lamp.
Identifies charger parts and lists compatible FLEX battery types.
Provides advice on charging temperatures, humidity, storage, and avoiding memory effect.
Step-by-step guide for assembling tool head, inserting battery/tool, and setting operational parameters.
Guidance on holding the tool, assuming a working position, and control usage.
Steps for charging batteries, understanding display indicators, and recognizing charge completion.
Interpreting flashing displays indicating battery or charger faults and recommended actions.
Instructions for cleaning power tool ventilation slots and the charger housing.
Statement that all repairs must be performed by an authorized customer service centre.
Refers to manufacturer catalogues for additional accessories.
Information on battery transport regulations and potential special measures for multiple units.
Declaration of conformity to relevant directives and standards.
Guidelines for environmentally friendly disposal of power tools and batteries according to EU directives.
Statement on the manufacturer's limited liability for damages from product misuse or third-party components.
To Next Page
General
